howto

At first before the image update you should check the bootloader version for Sezam Marvel and 1000HD. You can see the boot version on OLED/VFD display when starting to boot. Then you need to visit this page and download the latest version of boot for your box. If you use the box at first time, you should download 2 version of boot for Sezam Marvel and one for Sezam 1000HD. For Sezam Marvel you should update: v.3.291 than – v.4.0 or on the latest version on current time. For Sezam 1000HD you should update the Bootloader once on 4.29 or on the latest version on current time. Download the bootloader, unpack it, copy hdp (Sezam Marvel) or hde(Sezam 1000HD) folder to the root of USB and plug the USB stick to receiver.Then power on the receiver and wait the instruction on VFD/OLED display. Then disconnect the USB stick from the receiver.

Factory image installed on all Sezam Marvel by default. At first time you should make the decision which image you want to use further. For this step you should to visit the next sources for downloading the image: EGAMI,OpenATV, FTP or Community. After downloading the image you need to unpack it and copy hdp(Sezam Marvel), hde(Sezam 1000HD), hdx(Sezam 5000HD) folder to the root of USB and plug the USB stick to receiver. Then power on the receiver and wait the instruction on VFD/OLED display. On the display you will see the message with offering to update your box. Then you need to push the UP button and wait while the SW will be updated. Then disconnect the USB stick from the receiver. When you will have the new image on your Sezam you can to update it OnLine.